I found the following discussion that has a lot of details. https://learningnetwork.cisco.com/thread/24839
If you want the tunnel to have color bits 1 & 3, then you would add the following to the IOS tunnel interface: tunnel mpls traffic-eng affinity 0x5 mask 0x5 If you wanted color bit 1 matched and avoid color bit 3 then you would set: tunnel mpls traffic-eng affinity 0x1 mask 0x5 -- Clinton Work Airdrie, AB On Mon, Feb 9, 2015, at 01:41 AM, Johan Borch wrote: > Hi! > > I'm trying to understand how to get administrative groups/link-coloring > in > JunOS to play with link affinity in Cisco/IOS. But I don't understand it. > > In JunOS you assign the bit position 0-31 to the MPLS interface and then > use the names on your LSP, thats easy. > > What I don't get is how to mask this onto IOS. > > lets say it have 3 groups: > Bit position 1 > Bit position 2 > Bit position 3 > > How to I use link affinity/mask to use 1 and 2 in IOS or a link > affinity/mask to use position 1 and 3? Do anyone have experience with > this? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
