On 12/Feb/15 12:54, Lukas Tribus wrote: > Command is there on a rsp720, not sure if its supported though: > > PE#show version | inc image > System image file is > "sup-bootdisk:c7600rsp72043-advipservicesk9-mz.153-3.S1.bin" > PE#conf t > Enter configuration commands, one per line. End with CNTL/Z. > PE(config)#router bgp 65535 > PE(config-router)# address-family ipv4 vrf PIPPO > PE(config-router-af)#table-map ? > WORD route-map name > > PE(config-router-af)#
"table-map" has always been there. What you want is "table-map BLAH filter". Mark. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
