In addition, can you explain what kind of L2 device you use in SDH? 15 Фев 2015 г. 21:07 пользователь "Мурат Каипов" <[email protected]> написал:
> Hello dear. > Do you use some routing protocol? So, if you do, you have two choices. > First, do nothing, and hello and dead timers does failover for you. Second, > use BFD, and you will have subsecond failover. > Best Regards. > 15 Фев 2015 г. 18:03 пользователь "M K" <[email protected]> написал: > >> HiI have ASR9k , I got a new connection from a provider through SDH >> (active , backup)How can I trace if I lost connectivity as there is L2 >> device in between and move the traffic over the backup link >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
