On 05/03/2015 08:26, CiscoNSP List wrote: > Any other suggestions (i.e. resetting bgp session if certain threshold > is hit, then re-establishing session after x minutes, or being more > frugal on number of routes allowed etc) are greatly appreciated.
re-establishing sessions is probably highly advisable. Otherwise you will need to manually reset all bgp sessions from the rr clients if there's a problem. This will increase your service unavailability if you blow maxprefixes from your RRs. Also, check your SDM templates to ensure that you're using the correct profile: Router#show sdm prefer current Finally, make sure you're running recent code, e.g. 15.3(3)S4. These boxes have had some hilariously awful bugs on older code. E.g. port based l3vpn not forwarding traffic on early 15.3, port based pseudowires causing the entire unit to crash and reboot on 15.2, and so on. Nick _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
