Ah - Thank-you! Date: Tue, 10 Mar 2015 07:06:20 +0100 Subject: Re: [c-nsp] Deny default route (From customer - BGP) From: [email protected] To: [email protected] CC: [email protected]
show ip bgp nei xyz received-routes will give you the routes as you received them _before_ your own filtering. Use show ip bgp nei xyz routes instead. Regards,Fredrik On 10 March 2015 at 03:40, CiscoNSP List <[email protected]> wrote: Hi Everyone, Only had a few hours sleep, so I may be overlooking something extremely obvious...but we are receiving a default from a customer, even though route-map/prefix list *should* block it... router bgp xxx ... address-family ipv4 ... neighbor CUST_A route-map CUST_A-BGP-IN in ip prefix-list PL_DENY_DEFAULT seq 5 permit 0.0.0.0/0 ip prefix-list PL_CUST_A_BGP_PREFIXES seq 5 permit xxx.xxx.xxx.0/24 route-map CUST_A-BGP-IN deny 5 match ip address prefix-list PL_DENY_DEFAULT route-map CUST_A-BGP-IN permit 10 match ip address prefix-list PL_CUST_A_BGP_PREFIXES set community xxxxx:1400 Weird thing is, that "sh ip bgp summary" shows that neighbour as only having 1 in "State/PfxRcd" but "sh ip bgp nei xxx.xxx.xx.xx received-routes" shows the neighbour with 0.0.0.0 and there single /24 Cheers for any help. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
