We have a Cisco 3745 aggregating 10 Ethernet based DSL connections. I'm looking to implement basic QoS settings for VoIP. I have applied the config below, but "show policy-map interf gi4/0.3882" does not produce any results. I'm running (C3745-ADVIPSERVICESK9-M), Version 12.4(15)T14. I did notice that "show policy-map interf gi4/0" does produce some results. Does this mean the 3745 will not provide QoS for each DSL connection, but will provide an overall QoS for all connections?
class-map match-all VoIP match access-group name VoIP-RTP policy-map VoIP-QoS class VoIP bandwidth 250 class class-default fair-queue bba-group pppoe CDOL12VoIP virtual-template 32 sessions per-vlan limit 400 interface FastEthernet0/1 ip address 10.104.0.1 255.255.0.0 speed 100 full-duplex interface GigabitEthernet4/0 mtu 1518 ip address 1.1.1.1 255.255.255.252 service-policy output VoIP-QoS interface GigabitEthernet4/0.3882 description NAML encapsulation dot1Q 3882 second-dot1q 1-4000 pppoe enable group CDOL12VoIP interface Virtual-Template32 description 12M DSL Schools w/ VoIP mtu 1492 bandwidth 12000 ip unnumbered FastEthernet0/1 no ip route-cache cef no ip route-cache no peer default ip address service-policy output VoIP-QoS ip access-list extended VoIP-RTP permit udp any any range 20000 20039 Thanks! Jason _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
