Hi Gert, On Wed, Apr 01, 2015 at 09:38:45AM +0200, Gert Doering wrote: > quick question, because I cannot find the answer on cisco.com. > > If I run a WS-X6148E-GE-45AT in reverse POE mode (feeding power into > the 6500), but do not use the ports for actual switching, will the line > card still require power?
It will be a close call, but I recommend you connect the injectors every other port to leverage the 8:1 oversubscription. Although documentation states "No chassis or slot restrictions; the module can occupy any slot in any Catalyst 6500 or Catalyst 6500-E chassis.", I've had better results placing the 6148E in the top slot, that way you benefit from trickle-down electricity. Hope this helps, Job _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
