> > I am looking to purchase a cisco ASR1006. My needs is less than 10Gbps of > traffic, but I need about 5 10GigE ports. Don't want to LAG 1GigE ports, > b/c of cross connect costs. So I am considering either the ESP10 or ESP20. > > Will the ASR1000-6TGE work fine with ESP10 or 20? Or do I need a ESP40 or > higher just to for the card to work eventhough I have less than 10Gb > traffic.
Looks like you need ESP40+ and RP2...might be cheaper to go an ASR9001? http://www.cisco.com/c/en/us/td/docs/interfaces_modules/shared_port_adapters/configuration/ASR1000/fixed_ethernet_linecard/ASRfelcconf_guide/ASRoveth.html#pgfId-1082394 > > Also will be included is SPA with 10 1GigE interfaces. > > > --sharlon > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
