Hi Everyone,
Have 2 new ME3600's (ME3600-01(Working fine) + ME3600-02(fails to reach any VRF
IP on 1 PE..all other PE's(~10 other PE's) reachability is fine), both
RR-clients, both have no problems reaching all our other PE's IP's in global
and VRF's)
If I run a "show ip route vrf CUSTA" on both ME's, all routes displayed are
identical...including the problematic PE.
ME3600-01 can happily reach all VRF IP's on this PE, as well as Global
MR3600-02 can happily reach all global IP's on this PE, but no VRF IP's...all
VRF IP's are displayed (sh ip route vrf foo), just cant ping them, and traces
to them fail...stars on first hop...same in reverse(i.e. from problem
PE...traces back to ME01, work fine, traces to ME02, I get stars on first hop)
Traces to/from problem PE + both ME's Loops(Used for IGP+BGP) take same path,
and work.
Any suggestions are greatly appreciated!
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
