On 20/Apr/15 15:01, M K wrote: > Hi allI have a customer connected to my Edge router via two routers , each > with one connectionThe public subnet will be given to him from my spaceHis > main concern is load-balancing for incoming traffic Should I establish BGP > session with him or there is a better solution?
For outbound (you to the customer) load sharing, you could write two static routes on your edge router, each pointing to each of his routers. This will create two equal-cost paths toward the customer. For inbound (customer to you) load sharing, that will depend on the customer's topology, but there are several options. With two border routers on their side, it gets a little interesting. Mark. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
