Hi Guys, I am having issue in my lab router Cisco 2821. This router is booting on rommon mode all the time. I checked flash of this router in another working router. So flash is working fine in another router. I tried to use another router working flash on this router i am still having the same issue & getting the below error. Can anyone confirm me what is the issue on router, file system is corrupted on router?. Any advise to fix this issue would be appreciated.
*boot: cannot open "flash:"* *boot: cannot determine first executable file name on device "flash:"* System Bootstrap, Version 12.4(13r)T5, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 2007 by cisco Systems, Inc. Memory Dimms are not of the same type DIMM0 is a ECC Memory DIMM1 is a non-ECC Memory c2821 platform with 524288 Kbytes of main memory Main memory is configured to 64 bit mode with ECC disabled Upgrade ROMMON initialized boot: cannot open "flash:" boot: cannot determine first executable file name on device "flash:" c2821 platform with 524288 Kbytes of main memory Main memory is configured to 64 bit mode with ECC disabled Upgrade ROMMON initialized *boot: cannot open "flash:"* *boot: cannot determine first executable file name on device "flash:"* c2821 platform with 524288 Kbytes of main memory Main memory is configured to 64 bit mode with ECC disabled Upgrade ROMMON initialized rommon 1 > rommon 9 > dir flash: dir: cannot open device "flash:" ------- Thanks & Regards, Ahsan Rasheed _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
