I work at a small shop and only have a few customer BGP sessions, but I am quite happy with http://snmptt.sourceforge.net/ . Using a hosts file we can name the hosts sanely and tune snmptt to ignore some noisy customers
Cheers, Chris On Wed, May 6, 2015 at 5:25 AM, Nick Cutting <[email protected]> wrote: > This question is about how you monitor your neighborship sessions towards > clients (with or without vrfs). Whether it is EIGRP / OSPF / ISIS or BGP - > I am interested in how you are doing this. > > For example - EIGRP MIB is an absolute minefield, and I cannot seem to > get Neighbor up / neighbor down into our monitoring software (PRTG) > > The best indication, is the log message on the routers and switches. > > I imagine you larger shops are using splunk or some large syslog > processing daemon. > > My questions are > > (1) Is anyone using the CISCO MIB for neighbor up/down events, in any > protocol > (2) If using syslog, what daemon is watching the log (for syslog-ng etc), > and generating emails / alerts > (3) who is using EMM to generate alerts ? - this is not available on all > of our platforms - we are using IOS / IOS XE / Switches / Routers and ASA's. > > And the "new" EMM on ASA 9.3 is very limited. > > > > Thanks, > > Nick > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
