Hi list, Hoping I can get some advice on a simple setup:
Two sites, each with an ME-3600X-24TS-M, L2VPN between the two on Te0/1. ME3600-SiteA: Te0/1 - L2VPN via PE Te0/2 - Customer equipment ME3600-SiteB: Te0/1 - L2VPN via PE Te0/2 - Customer equipment I want to accept all tags from the customer port Te0/2 at both sites and pass it across the L2VPN on Te0/1, back out on Te0/2 at the other side and vice-versa. Will the following config work: interface TenGigabitEthernet0/1 switchport trunk allowed vlan none switchport mode trunk load-interval 30 service instance 1 ethernet encapsulation default ! ! interface TenGigabitEthernet0/2 switchport trunk allowed vlan none switchport mode trunk load-interval 30 service instance 2 ethernet encapsulation default ! ! connect eline-1-2 TenGigabitEthernet0/1 1 TenGigabitEthernet0/2 2 Thanks in advance. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
