>> Hello,
>>
>> I need a hint regarding a OSPF/BGP setup on some C6500.
>> I have BGP configured between the loopback IPs of several routers.
>> Lets say router a and router b advertise x.x.x.x/24 (connected network) to
>> router c (and d, e...).
>>
>> Router c now has 2 BGP routes with same attributes (except the nexthop)
>> and takes the oldest one as far as I see.
>
> For EBGP correct. You need to use IBGP if you want to respect IGP metrics.
Also, you shouldn't "redistribute" your loopback into OSPF, but properly
configure it
with ospf:
interface Loopback0
ip ospf 1 area 0
Lukas
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
