I would have to imagine something like this would be up your alley:
http://www.mrv.com/sites/default/files/datasheets/us_pdfs/mrv-fd-dmr10g.pdf This should take an 8G fiber channel SFP+ and allow it to come out in a 10G SDH framing. Reverse on the other side and it "should" just work. - Jared On Tue, Jul 07, 2015 at 08:46:52AM +1000, Feedly Reader wrote: > Hi all, > > > > I was looking for some insight around carrying 8G Fibre Channel data over > third party P2P links. We would like to connect Fibre Channel switching to > each other between two locations and the only available options are 10G > Ethernet or an SDH link provided by local carrier. They will not provide > dark fibre or wavelength for us to use. > > > > I have looked in to using Nexus 5600 and carrying 8G FC as FCOE traffic over > 10G Ethernet. However, this requires another switching device (Nexus 5600) > between the two Fibre Channel Switches (MDS 9200). > > > > I have also looked in to using FCIP, which is the currently the only option > we can do without having another set of devices. > > > > So, it is possible to carry 8G FC traffic over STM64 transparently, possibly > using a transponder card or have I lost the plot? > > > > Thanks! > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ -- Jared Mauch | pgp key available via finger from [email protected] clue++; | http://puck.nether.net/~jared/ My statements are only mine. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
