Hi Folks, I have inherited the delivery of a solution for which there has been little design. I am currently working through options to provide our customer (a epos provider) with multicast beacon¹ traffic for till systems as a keep-alive.
The multicast sender is to sit behind ASA5515X (already purchased!) The receivers (various retail stores) will be terminated on our LNS within their own VRFs. Utilising the extranet option 2 senders VRF on the receivers PE. With regards to design I am looking to leak the sender¹ prefixes & any necessary RP addresses from the common¹ VRF into each of the customer VRF¹s as the same beacon¹ source address is what the till systems will use for TCP based communications. In order to get 2-way comms I obviously need to leak the receivers prefixes into the senders common¹ VRF. Just wondering if anyone has seen anything similar to this or can see any real ³gotchas² with the approach? Kind Regards, Neil _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
