SRE has MFIB implementation, in which that command is deprecated
On 8/13/2015 10:24 PM, Plawansai RMUTT CPE IX wrote:
Such as:
(config)#mls ip multicast flow-stat-timer 9
Warning: This command is no longer supported.
snmp-server enable traps ethernet cfm alarm
ip nat inside source list 114 pool pool_vrf_DR vrf DR
ip nat inside source static 172.16.76.66 10.10.58.1 vrf MR
https://supportforums.cisco.com/sites/default/files/attachments/discussion/c
ant_configure.jpg
How should I do?
Thank you very much.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
GloboTech Communications
Phone: 1-514-907-0050 x 215
Toll Free: 1-(888)-GTCOMM1
Fax: 1-(514)-907-0750
[email protected]
http://www.gtcomm.net
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
