Over the years there have been lots of posting about using "show" command
outputs to identify various interface and resource issues.
        show interfaces gigabitEthernet 1/1 stat
        show interfaces gigabitEthernet 1/1 | inc drop
        show interfaces gigabitEthernet 1/1 counters errors
        show buffers
        show ibc
        show platform buffers
        show platform ibc
        show platform eobc
        show platform hardware capacity cpu
        show platform hardware capacity eobc
        show platform hardware capacity fabric
        show platform hardware capacity forwarding
        show platform hardware capacity interface
        show platform hardware capacity netflow
        show platform hardware capacity pfc
        show platform hardware capacity qos

How many of these are available via SNMP?  Are there certain key numbers to
regularly (per 5 minutes, hourly, daily, weekly, etc) track?  Has someone
developed a script that runs on a regular basis that captures the CLI output
and analyzes it?

Frank

_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to