Hi All, I can see there are snmp community-map configured on my some of the routers and those routers are not discoverable while snmp polling even though ping to/fro server is fine. Since there are very old configurtion, so I don't find why it was done. Configuration is as below.
snmp mib community-map XXXXX engineid 0000000902000004C16AE9E0 snmp mib community-map YYYYYY engineid 0000000902000004C16AE9E0 snmp mib community-map zzzzzzzengineid 0000000902000004C16AE9E0 snmp mib community-map abcd engineid 0000000902000004C16AE9E0 So my question is, Q1- Does this command comes by itself into the configuration and associate with all defined community-string or it is configured manually? Q2- What can be the impact if I remove the these community-maps value? -- Regards, Zahid Khan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
