On 17 September 2015 at 10:52, Patrick M. Hausen <[email protected]> wrote: > Hi, all > > we monitor all our Cisco gear with Rancid and archive configs in CVS. > (http://www.shrubbery.net/rancid/) > > One chassis shows a change of config once a day, every day. Five > minutes later at the next rancid run the change is reverted. > > 1st rancid message: > ----------- > !Interface: FastEthernet0/0, AMD Am79c977 > !Interface: FastEthernet0/1, AMD Am79c977 > ! > !Slot 0: fru > - !Slot 0: fru AIM-VPN/BPII > - !Slot 0: type C2621XM 2FE Mainboard, 2 ports > + !Slot 0: type C2621XM 2FE Mainboard, 3 ports > !Slot 0: hvers 4.1 rev B0 > - !Slot 0: hvers 1.0 rev B0 > !Slot 0: part 73-7754-06, serial FOC09301B14 > - !Slot 0: part 800-18029-01, serial FOC08260A1H > + ! > + !Slot 0/1: fru AIM-VPN/BPII > + !Slot 0/1: type Unknown WAN > + !Slot 0/1: hvers 1.0 rev B0 > + !Slot 0/1: part 800-18029-01, serial FOC08260A1H > ! > !NAME: "2621XM chassis", DESCR: "2621XM chassis" > !PID: > !VID: 4.1 > ----------- > > 2nd rancid message: > ----------- > !Interface: FastEthernet0/0, AMD Am79c977 > !Interface: FastEthernet0/1, AMD Am79c977 > ! > !Slot 0: fru > - !Slot 0: type C2621XM 2FE Mainboard, 3 ports > + !Slot 0: fru AIM-VPN/BPII > + !Slot 0: type C2621XM 2FE Mainboard, 2 ports > !Slot 0: hvers 4.1 rev B0 > + !Slot 0: hvers 1.0 rev B0 > !Slot 0: part 73-7754-06, serial FOC09301B14 > - ! > - !Slot 0/1: fru AIM-VPN/BPII > - !Slot 0/1: type Unknown WAN > - !Slot 0/1: hvers 1.0 rev B0 > - !Slot 0/1: part 800-18029-01, serial FOC08260A1H > + !Slot 0: part 800-18029-01, serial FOC08260A1H > ! > !NAME: "2621XM chassis", DESCR: "2621XM chassis" > !PID: > !VID: 4.1 > ----------- > > Any idea why the VPN AIS seems to go out have a beer precisely > once a day? It's not in use, currently. But this is annoying to say the > least and litters our CVS repository. > > Thanks > Patrick > -- > punkt.de GmbH * Kaiserallee 13a * 76133 Karlsruhe > Tel. 0721 9109 0 * Fax 0721 9109 100 > [email protected] http://www.punkt.de > Gf: Jürgen Egeling AG Mannheim 108285 > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/
Hi Patrick, Others have described on the list some technical reasons the routers give this output, also RANCID polling frequency can cause some unwatned noise. I wrote a small patch you can apply here, it filters out sections from RANCID emails that don't containt what I could call an update (something is essentially added and removed as per your example). It's a bit ugly but it works and it's here, http://null.53bits.co.uk/index.php?page=rancid-filter In the example I made, the startup config has been altered on a rouer so RANCID reports a diff with: - !Flash: nvram: 178 -rw- 10463 <no date> startup-config + !Flash: nvram: 178 -rw- 10431 <no date> startup-config Which I don't really need to know about. Cheers, James. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
