On 5/Oct/15 11:05, Oleksii Zolotarov wrote:
> FYI: Pushing 300Mbps/150Mbps up to channels and same traffic down to > clients will cause 40..50% CPU usage on 7201 with this kind of > configuration. Yes, but CPU and traffic growth on the NPE-G2 is not linear. I've been able to get 950Mbps out of an NPE-G2 at 91% CPU with no traffic drops. Of course, these numbers change if you add ACL's, but not as bad as you would think if you keep it simple. Ultimately, a couple hundred Mbps with a typical peering configuration should be nicely doable for cheap. It all depends on the OP's use-case. Mark. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
