As of 15.5(2r)S with the AdvancedMetroIPAccess license, ip flow
ingres/egress can be enabled on SVI's, but nothing to configure anything
useful like top talkers, or export flow data to a collector.
There's no mention of it in any of the technical deep dive powerpoints
or software configuration guides I've seen either (I've read most of
them start to finish over the past few months).
I've never bothered to ask TAC.
-----Original Message-----
From: cisco-nsp [mailto:[email protected]] On Behalf Of
Scott Miller
Sent: November-16-15 4:14 PM
To: [email protected]
Subject: [c-nsp] ASR 901 and net-flow
Does anyone know if the ASR 901 supports net-flow? I can't find any
documentation on it as of yet (only been searching about 30 min or so).
I
did read a couple posts in odd-ball places stating it's not supported on
the 901. Can anyone confirm this?
Thanks,
Scott
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
