Sorry that should read:

Show flow monitor exporter statistics

-----Original Message-----
From: cisco-nsp [mailto:[email protected]] On Behalf Of Nick 
Cutting
Sent: 10 December 2015 08:17
To: [email protected]; [email protected]
Subject: Re: [c-nsp] asr1001x nat logging

You need to use the show commands to see if the ASR thinks the traffic is 
leaving:

What is the output of show flow exporter?

I always find it's something like "SE linux" on the collector, and this stops 
you from seeing it in tcpdump.

-----Original Message-----
From: cisco-nsp [mailto:[email protected]] On Behalf Of 
[email protected]
Sent: 10 December 2015 08:06
To: [email protected]
Subject: [c-nsp] asr1001x nat logging

Hello, Cisco-nsp..

On my cisco asr1001x not work nat logging.
What could be the problem?
Netflow v5 work.
I do not see traffic on collector with tcpdump.
I tryning soft:
System image file is 
"bootflash:/asr1001x-universalk9.03.12.01.S.154-2.S1-std.SPA.bin"
System image file is 
"bootflash:/asr1001x-universalk9.03.15.00.S.155-2.S-std.SPA.bin"


interface TenGigabitEthernet0/0/0
 description Downlink-to-X670
 ip address 10.254.253.18 255.255.255.252  no ip redirects  no ip unreachables  
ip nat inside  ip flow monitor flow_v5 input  ip flow monitor flow_v5 output  
service-policy type control CTRL-IPOE  ip subscriber routed
  initiator unclassified ip-address
end

ip nat settings mode cgn
no ip nat settings support mapping outside ip nat settings pap limit 60 ip nat 
log translations flow-export v9 udp destination 10.0.0.122 9995 source 
TenGigabitEthernet0/0/0 ip nat log translations flow-export v9 vrf 0 on ip nat 
translation timeout 300 ip nat translation tcp-timeout 1800 ip nat translation 
pptp-timeout 1800 ip nat translation udp-timeout 60 ip nat translation 
finrst-timeout 10 ip nat translation syn-timeout 10 ip nat translation 
dns-timeout 10 ip nat translation icmp-timeout 10 ip nat translation 
port-timeout tcp 80 360 ip nat translation port-timeout tcp 8080 360 ip nat 
translation port-timeout tcp 1600 180 ip nat translation port-timeout tcp 110 
180 ip nat translation port-timeout tcp 25 180 ip nat translation max-entries 
all-host 2000 ip nat pool NAT_POOL_18.19.142 18.19.142.0 18.19.142.254 netmask 
255.255.255.0 ip nat inside source list ACL_NAT_18.19.142 pool 
NAT_POOL_18.19.142 overload



flow exporter carbon4_v5
 destination 172.1.1.2
 transport udp 9996
 export-protocol netflow-v5
!
!         
flow monitor flow_v5
 exporter carbon4_v5
 cache timeout inactive 10
 cache timeout active 1000
 record netflow-original


--
С уважением,
 Dmitry                          mailto:[email protected]

_______________________________________________
cisco-nsp mailing list  [email protected] 
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

_______________________________________________
cisco-nsp mailing list  [email protected] 
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to