Hi,
> I would like to configure the ASR920 port that connects to > the CPE as an trunk port (C-VLANs), and doing an vlan > encapsulation (S-VLAN) and transporting this to the port > pointing towards my ASR9K without tampering with the S-VLAN > or C-VLAN, on the ASR9K doing a "encapsulation dot1q (S-VLAN) > second-dot1q (C-VLAN) This should be straigt forward. Configure the trunk towards the 9k via Trunk EFP [1] and the port as per [2]. Config should look like this: ! slvans: bridge-domain 1-5, 7, 9-12 ! interface gigabitethernet2/0/1 descr Trunk to ASR9k service instance trunk 1 ethernet encapsulation dot1q 1 - 5, 7, 9 - 12 rewrite ingress tag pop 1 symmetric bridge-domain from-encapsulation ! ! interface gigabitethernet2/0/2 descr Customer C-vlan range 100-200 in S-vlan 5 service instance 5 Ethernet encapsulation dot1q 100-200 bridge-domain 5 > There are commands that are not allowed, if I follow to configuration > examples. Which one exactly (show the whole port-config), and whats the exact error message? Regards, Lukas [1] http://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/ce/b_ce_xe-313s-asr920-book/b_ce_xe-313s-asr920-book_chapter_00.html#GUID-FE6D829C-A814-46F3-A9E6-4AFC094AB066 [2] http://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/ce/b_ce_xe-313s-asr920-book/b_ce_xe-313s-asr920-book_chapter_01.html#ID-1384-00000345 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
