If you are getting free loaner gear, I would suggest trying the new Nexus 9300 
series with Nexus 2000 edge.
This creates a single switching infrastructure that appears as a single switch 
and better manageability than the stackables.
If you are going with a nexus 7004 as the core, you can do the same thing with 
the Nexus 2000 edge.
The latency with either one is still going to be well below measurable for 
gaming applications.

Mack McBride | Network Architect | ViaWest, Inc.
O: 720.891.2502 | [email protected] | www.viawest.com | LinkedIn | 
Twitter | YouTube



-----Original Message-----
From: cisco-nsp [mailto:[email protected]] On Behalf Of Frank 
Bulk
Sent: Saturday, December 26, 2015 10:19 AM
To: 'Laurent Dumont'; [email protected]
Subject: Re: [c-nsp] Equipment for a large-ish LAN event

This thread and the video might be interesting and relevant:
http://markmail.org/thread/crgxdtqsbegf72ah

Frank

-----Original Message-----
From: cisco-nsp [mailto:[email protected]] On Behalf Of Laurent 
Dumont
Sent: Tuesday, December 08, 2015 2:08 PM
To: [email protected]
Subject: [c-nsp] Equipment for a large-ish LAN event

Hi gents,

This email might seem a bit strange but bear with me. I am a member of a 
student club in Montreal named "Lan ETS". Every year, we organize on the 
biggest LAN event in North-America. We have an amazing partnership with Cisco 
where they allow us to request a fair amount of equipment so that we can create 
the best experience for our players.

This year, we are looking into some equipment that slightly out of our usual 
expertise. Usually, we target high-density stackable switches like a 
3650/3750/3850 with 48 GigE and 4 SFP for our 10G core. We design our network 
around small "islands" of players all linked with each other through a 2x10G 
fiber network. Everyone is assigned a public address and we route everyone out 
through our core switch.

We were looking at either the Nexus 7004 chassis or the ASR 9004/9006 chassis 
as the core "switch". We would then use 48xGigE and 1x24 SFP+ line cards. Our 
actual port requirements and somewhat flexible but we do need at least 4x10G 
Fiber ports. And at least 48 GigE ports for players or access switches.

I'm also open to any suggestion within Cisco portfolio. Our needs are pretty 
standard and nothing extraordinary but we would like to use this opportunity in 
order to try new equipment and technologies that are usually only seem within 
ISP and large networks.

I appreciate any input on the matter!

Thank you

--
Laurent Dumont
https://coldnorthadmin.com

_______________________________________________
cisco-nsp mailing list  [email protected] 
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


_______________________________________________
cisco-nsp mailing list  [email protected] 
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
This message contains information that may be confidential, privileged or 
otherwise protected by law from disclosure. It is intended for the exclusive 
use of the addressee(s). Unless you are the addressee or authorized agent of 
the addressee, you may not review, copy, distribute or disclose to anyone the 
message or any information contained within. If you have received this message 
in error, please contact the sender by electronic reply and immediately delete 
all copies of the message.
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to