On Wed, 13 Jan 2016, Nick Hilliard wrote:
Alireza Soltanian wrote:
My questions are is What will happen if we exceed capacity(Egress or
Ingress) in Channel#0 of Slot#2? Will device use Capacity of Channel#1?
no - the traffic will be dropped.
slot 2 looks like a 6708 card. There's been a reasonable amount of
discussion in the past on cisco-nsp about oversubscription on this and
other 10G line cards on the c6500/c7600 platform. Overall, the platform
isn't good at handling 10G.
That's a little harsh. It handles 10G fine...you just have to carefully
plan your port layout if you use the [oversubscribed] 8-port cards and
have some links that you expect/want to carry line-rate traffic.
cisco.com has documentation online that will tell you which ports share
capacity (and should not both be used by high traffic links).
----------------------------------------------------------------------
Jon Lewis, MCP :) | I route
| therefore you are
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
