As long as it's a 6513E of course, the non -E does not support sup2t
you will get 40+40 full duplex for every slot on the 6513E with
sup2t(with the newer modules);
it will downscale to 20+20 with the 67xx modules of course.
You are correct with the sup720, the 67xx line cards are only supported
in slots 9-13.
On 1/13/2016 6:58 AM, Alireza Soltanian wrote:
Hi everybody
We are planning for installing Cisco 6513. Based on my researches, if we
install SUP-2T on this Chassis we will have 80Gbps Fabric Switch capacity
(Half-duplex) for each slot. But if we use SUP-720 then we will have 20Gbps
Fabric Switch capacity for Slots#1-6 and 40Gbps for slots#9-13.
Is this assumption correct?
Thank you
Alireza
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
GloboTech Communications
Phone: 1-514-907-0050 x 215
Toll Free: 1-(888)-GTCOMM1
Fax: 1-(514)-907-0750
[email protected]
http://www.gtcomm.net
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
