Short answer is yes and full duplex, functionally but you never want to
hit that mark IMO
This document will help with most 6500 architecture questions:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-6500-series-switches/prod_white_paper0900aecd80673385.html
Only the ports connected to the same asic can send traffic between each
other without using the fabric (i've tested this)
that's where they get the 64gbps local switching (port pairs have 16g
each, 2 port pairs on each fpga, 4 one each asic, 16g from each fpga to
fabric asic so 32gbps per 'side', so 64 total even though only 40g to
backplane fabric)
On 1/31/2016 9:42 AM, Alireza Soltanian wrote:
Hi everybody
I cisco documentations it was mentioned C6708-10GE-3CXL supports 64Gbps of
Local Switching. Is this Half-Duplex or Full Duplex
Can Anyone help?
Thank you
Alireza
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
GloboTech Communications
Phone: 1-514-907-0050 x 215
Toll Free: 1-(888)-GTCOMM1
Fax: 1-(514)-907-0750
[email protected]
http://www.gtcomm.net
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
