Hi what is difference between topmost exp and exp on mplsqos ? when i want change exp on P1 to P2 (from 5 to 3 ) ,i should use what command ?
R3(config-pmap-c)#set mpls experimental ? <0-7> Experimental value imposition Set Experimental value at tag imposition topmost Set Experimental value on topmost label CE1----PE1----P1----P2----P3----PE2----CE2 icmp packets from ce1 to ce2 on pe1 marked by ef . packets capture between PE1 ,P1 that have exp 5 . I want change exp to 3 from P1 to P2 .then i config policy-map on P1 and set mpls experimental topmost 3 on it and config on ingress interface. When capture traffic ,i see pachets have exp 5 . please have a sulotion for this problem . Thanks. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
