Cheers Nick - no-one can physically check the cables until tomorrow, so Ill have to wait until then,,,,Ive also contacted supplier re what was shipped (Supposed to be 10Gb, but reporting as 1Gb, with GLC-LH-SMD-CURV).
Thanks ________________________________________ From: Nick Hilliard <[email protected]> Sent: Saturday, 20 February 2016 10:11 PM To: CiscoNSP List Cc: [email protected] Subject: Re: [c-nsp] Nexus 3K (3048TP) and 10Gb twinax CiscoNSP List wrote: > # sh int eth 1/51 > Ethernet1/51 is down (SFP validation failed) n3k will also report this if you use the wrong speed transceiver in the port. But in this case it looks like either you've got the wrong type of DAC connected, or the DAC has been encoded incorrectly, or nxos screwing up the media capabilities detection: > Dedicated Interface > Hardware: 1000/10000 Ethernet, address: 547f.ee7b.ff5a (bia 547f.ee7b.ff5a) [...] > Full-duplex, 10 Gb/s, media type is 1G this suggests incorrect cable or incorrect cable coding: > part number is GLC-LH-SMD-CURV Nick _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
