Dears
I have installed VSM on ASR9K for NAT44 CGN
I can see a lot of drops in the output of show cgn nat44 nat1 statistics
RP/0/RSP0/CPU0:NAT1#show cgn nat44 nat1 statistics
Statistics summary of NAT44 instance: 'nat1'
Number of active translations: 4079397
Inside to outside drops port limit exceeded: 155093
No translation entry drops: 1617189
I have some questions regarding this if you can assist
One of the experts told me that number of active translations are 4M (it can be
shown from the above output that the number is like that) , is this number per
module ? per service ? can I configure extra to isolate this?
inside to outside drops ?
portlimit drops ? I have configured it to be 2048 , should I increase it ? 2048
means for each private IP address there is 2048 available ?
Thanks in advance
BR,
Mohammad
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
