I thought through put only apply to egress traffic that's why I ask this question.
-- Sent from my iPhone On Apr 26, 2016, at 6:10 AM, Gabriel <[email protected]> wrote: >> >> Seriously? so if i have 4 ports then per port 1.2G? >> >> we have 10G link from ISP so you are saying i need 20G license right, >> 10G in and 10G out >> >> On Mon, Apr 25, 2016 at 6:52 PM, Gabriel <[email protected]> wrote: >>>> >>>> ASR 1001 and in base price it comes with 2.5G throughput and we have >>>> 10G link coming from ISP and our legit traffic is 1G around majority >>>> time we get DDoS attack around 4 to 5G so i want to use router ACL to >>>> filter traffic so it will drop all packet interface level but real >>>> question is does 2.5G throughput has any effect? what is 2.5G >>>> throughput here and how it won't fit in my requirement? >>> >>> Hi, >>> >>> I remember asking Cisco this question a while ago and, if I'm not > mistaken, >>> the license specifies the total amount of traffic allowed to pass > through >>> the router. So, with a 2.5G license, the ASR is able to take 1.25G in > (from >>> the ISP, for instance) and pass them to the out interface (to the > internal >>> network). > > You have 2.5G per device. Assuming what comes in must go out, in+out cannot > add to more than 2.5G. AFAIK, ASR1001 ca only have 2.5G or 5G license. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
