You would use a QOS policer/ rate limit policy for this The policer would pass the traffic upto it’s limit and then discard the rest The policer can look at anything an ACL can
There are examples on the net re hardening an edge router https://www.bing.com/search?q=cisco+router+harden+rate+limit Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 From: Satish Patel<mailto:[email protected]> Sent: Monday, May 9, 2016 4:03 PM To: Cisco Network Service Providers<mailto:[email protected]> Subject: [c-nsp] Dynamic ACL Is there a way in cisco i can put logic if bandwidth utilization is above 5G then apply specific ACL (example, deny ip any any fragments) I don't want packet travel all the time through ACL, I can set trigger them on event. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
