I ran into a similar problem on our older ASR1001's, trying to get FNF to work....one way traffic only being reported(Config was correct)....opened TAC case that was "protracted"....out of frustration, and needing FNF "immediately", I ended up having to just use old-style dot1Q subints, and FNF worked without issue(Same config as was on the BDI Int).....Ill dig up the old case details.....but this was at least a year ago....so was hoping the "bug" was fixed by now....
________________________________________ From: cisco-nsp <[email protected]> on behalf of Mike <[email protected]> Sent: Sunday, 15 May 2016 6:06 AM To: [email protected] Subject: [c-nsp] netflow on bridge domain interface Hi, I am playing to ntopng and nprobe to capture the flow exports from a bridge domain interface, and I seem to only be seeing statistics for one side of the conversation however (inbound internet -> hosts). The BDI is connected to my default gateway and so certainly everything to and from the internet has to pass by this way. I am running 03.10.05.S on an asr1000, wondering if this is a bug/limitation/config error on my part? Mike- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
