Thanks Pshem. I tried something similar to yours and it also didn't work. We are using ISR routers on IOS 15.3 so it may be a feature issue or ISR limitation, whats odd is you can debug aaa coa on the router and it seems happy with the coa but just doesn't know what to do with it. The feature navigator doesn't really say yes/no. I'll need to lab on an XE platform.
Kind Regards, Greg Antic Smart Technology Centre (Pty) Ltd +27 87 310 1751 / Tel [email protected]<mailto:[email protected]> Block 2, Townsend Office Park, No. 1 Townsend Road,<x-apple-data-detectors://18> Bedfordview, 2008 On 22 May 2016, at 2:00 AM, Pshem Kowalczyk <[email protected]<mailto:[email protected]>> wrote: Hi, We use CoA on our 9k BNGs. This is the syntax we use: Cisco-AVPair += "ip:qos-policy-out=add-class(sub,(class-default),police(10000),set-ip-dscp(0),set-cos-inner(0))" kind regards Pshem On Sun, 22 May 2016 at 02:56 Greg Antic <[email protected]<mailto:[email protected]>> wrote: Hi Guys, Is anyone using coa to dynamically adjust qos policy on pppoe subscriber sessions? I am sending the same cisco av-pair in the coa that i send during session establishment but the nas router doesnt apply the coa but works fine when session is established. Kind Regards, Greg Antic Smart Technology Centre (Pty) Ltd +27 87 310 1751 / Tel [email protected]<mailto:[email protected]><mailto:[email protected]<mailto:[email protected]>> Block 2, Townsend Office Park, No. 1 Townsend Road,<x-apple-data-detectors://18> Bedfordview, 2008 **************************************************************** The views expressed in this email are, unless otherwise stated, those of the author and not those of Smart Technology Centre or its management. The information in this email is confidential and is intended solely for the addressee. Access to this email by any other party is unauthorised. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted in reliance on this, is prohibited and may be unlawful. Whilst all reasonable steps are taken to ensure the accuracy and integrity of information and data transmitted electronically and to preserve the confidentiality thereof, no liability or responsibility whatsoever is accepted if information or data is, for whatever reason, corrupted or does not reach its intended destination. *************************************************** _______________________________________________ cisco-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ **************************************************************** The views expressed in this email are, unless otherwise stated, those of the author and not those of Smart Technology Centre or its management. The information in this email is confidential and is intended solely for the addressee. Access to this email by any other party is unauthorised. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted in reliance on this, is prohibited and may be unlawful. Whilst all reasonable steps are taken to ensure the accuracy and integrity of information and data transmitted electronically and to preserve the confidentiality thereof, no liability or responsibility whatsoever is accepted if information or data is, for whatever reason, corrupted or does not reach its intended destination. *************************************************** _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
