Thank for input. Good to know we don't need to do extra configuration to create redundancy. So in future if i slide in other RP/ESP it will auto function right?
On Sun, May 22, 2016 at 5:32 PM, CiscoNSP List <[email protected]> wrote: > You have no RP/ESP/SIP redundancy....if any of those fail, you are in trouble > > If you add another RP+ESP, then you have auto redundancy...one will be > primary, the other failover (We have them, I have tried this many times in > the lab.....ie disconnecting primary RP etc to ensure backup RP takes > over....they do) > > If you only have one SIP, but multiple SPAs, then connect into different SPAs > for "redundancy"....but you are only getting SPA redundancy, not > SIP.....dual(Or more SIPs), SPAs in each one, you get SPA redundancy. > > Or, the best option, is two completely separate boxes....both connected to > upstream....customers can connect to both.....if one dies, you are still > operational...this is far better than a single box, with dual "everything" > > ________________________________________ > From: cisco-nsp <[email protected]> on behalf of Satish Patel > <[email protected]> > Sent: Monday, 23 May 2016 5:13 AM > To: Cisco Network Service Providers > Subject: [c-nsp] ASR1006 Hardware redundancy question > > I am new to ASR1006 and i never work on router with hardware > redundancy so i just want some input and understanding how does it > work. currently we have single component so its not a 100% redundant. > > ESP40 - 1 > RP2 - 1 > SIP - 1 > SPA - 4 ( 1x10GB SPA) > > Question: > > Do i need to configure or run some command to tell router related > redundancy or its builtin function and it will auto detect number of > component and take decision related Action-Hot standby. Let say in > future i purchase RP2 component and plug into router does my router > auto detect two RP2 processor and enable Redundancy? > > Just want to understand how Hardware redundancy will work. > > In my current setup where we have all single component in that case we > have single SIP with 4 SPA cards, If one of SPA failed how does it > provide redundancy? > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
