Hi, On Fri, Jun 03, 2016 at 01:14:17PM +0200, Patrick M. Hausen wrote: > E.g. after Gerd's answer I looked up the ASR9k family from Cisco. I cannot > find that 4M routes figure anywhere in the datasheets.
Cisco documentation is always fun to work with :-) - and in the particular case of ASR9k, the only complete and correct documentation seems to be the answers that "Xander" gives on supportforums.cisco.com... https://supportforums.cisco.com/document/105496/asr9000xr-understanding-route-scale ignore everything that talks about "Trident" - that's the old ASR 9000 line card architecture, ASR9001 is "Typhoon" (the soon-to-be-old as-well architecture, to be replaced by "Tomahawk"), and you'll find: ------------------- snip ---------------- Typhoon Specific Typhoon has a FIB capability of 4M routes. Typhoon uses separate memory for L2 and L3 and therefore the profile command discussed above is not applicable to the Typhoon based linecards ------------------- snip ---------------- gert -- USENET is *not* the non-clickable part of WWW! //www.muc.de/~gert/ Gert Doering - Munich, Germany [email protected] fax: +49-89-35655025 [email protected]
signature.asc
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
