Hi list
After upgrading my asr1006 to version 03.16.03.S, my network management system
(HP OpenView v 9.0) can no longer do a proper hardware inventory.
Older XE version:
name Model Name Type
Serial Firmware HW-ver Software version
module 0 ASR1000-SIP40 cevModuleASR1000SIP40 JAE183800QV
15.3(3r)S V02 03.13.02.S.154-3.S2-ext
module F0 ASR1000-ESP40 cevModuleASR1000ESP40 JAE183504TX
15.2(1r)S V02 03.13.02.S.154-3.S2-ext
module R0 ASR1000-RP2 cevModuleASR1000RP2 JAE183806E9
15.2(1r)S V05 03.13.02.S.154-3.S2-ext
SPA subslot SPA-1X10GE-L-V2 cevSpa1p10GeXfpV2 SAL183608ZD
1.9 V04
subslt xver 0 XFP-10GLR-OC192SR cevXFPOc192smlr2 b1cyltz30023
A
XE 3.16.03.S
name Model Name Type Serial
Firmware HW-ver Software version
1 cpu-3100 0
15.2(1r)S 03.16.03.S.155-3.S3-ext
2 cpu-accessPro 0
15.2(1r)S 03.16.03.S.155-3.S3-ext
3 cpu-4000 0
15.3(3r)S 03.16.03.S.155-3.S3-ext
No entries for subslots or transceivers, no serialnumber, wrong
hardware-version.
I found nothing in the releasenotes that could explain this.
What is going on?
Jens S Andersen Email: [email protected]
Aalborg University Telf: 9940 9464
Selma Lagerløfs Vej 300, 3.1.12 Fax: 9940 7593
9220 Aalborg
Denmark
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
