These don't seem to be on any official cisco supported list.
I have quite a large need to for this, in between a transition from traditional
3 tier 1 gig/10gig(SFP) world to 10gig(copper)40 gig Leaf/Spine world.
I ideally want to connect my ten gig SFP+ ports with copper SFP+ transceivers
(NOT twinax) - to my ten gig copper switches (9k's)
4 x 10 Breakout support is limited to the 9332 switches and the chassis, and I
didn't want to burn 40 gig uplinks on the 10 gig copper switches, by running
them at a single 10gig speed for SPF+
These ten gig copper SFP+ transceivers do exist - has anyone used them - will
cisco support them? I understand that they have very limited distance due to
the power limitations.
Any field experiences shared would be greatly appreciated.
ProLabs 10G Copper SFP+ features:
10G copper modules allow 10G bandwidth over existing infrastructure
Simplified purchase of copper SFP+ as opposed to new switch
Supports links up to 30m using Category 6A/7 cabling
RJ45 connector
Compatible with a range of OEM's including Cisco, Arista, Brocade, Juniper,
Dell and others
Nick
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
