Greetings all- I have some 7301's setup with MP-BGP, ISIS/te, and LDP. All of that works.
I'm trying to setup a L3VPN across this network (this is all lab). All my routes show up on each side of the L3VPN. My tunnels come up between endpoints. The problem I'm having is that traffic from the CE routers (2811's) makes it to the attached PE (7301), but doesn't appear to use the Tunnel to get across the MPLS network. I see this in failed pings between the CE routers and traceroutes between them that show the link addresses of the P routers before the traffic fails. So, since my Cisco MPLS experience is limited, I'm asking the collective to point out what issues may cause this type of behavior. Thanks- Joe _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
