On 8 November 2016 at 18:24, James Bensley <[email protected]> wrote: > On 4 November 2016 at 15:40, Simon Lockhart <[email protected]> wrote:
As we're both in the UK have you asked the carrier to perform any testing (assuming this is a 3rd party wave) ? A while back we had an issue with a wave from VirginMedia. We had an MX480 at one end and ASR9006 at the other. We had one way transmission (from MX to ASR) until just for the sake of it an engineer toggled the ASR9K port from LAN PHY to WAN PHY then back to WAN PHY [1] and it started working. After more investigation something about the VM muxes was not playing nice with the ASR9K, but we haven't had this with waves from BT. Cheers, James. [1] We had already done all the usual stuff, bounced ports, made packet captures and debugs, swapped fibre patches, SFPs, ports, even line cards. We stuck an EX switch on the end and it worked. Back to ASR9K and it wasn't working still. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
