Can anybody point me in the right direction. I'm trying to capture a broadcast ARP packet from a specific MAC address on a Sup6T When I ping from the device in question, I capture the ICMP and not the initial ARP, (This is after clearing the device ARP cache.)
I've got the following. From what I've read, I need to change the ipv4 to other, but that will not let me capture via smacm and ideas? show platform capture elam release show platform capture elam asic eureka slot 1 show platform capture elam trigger master eu10 dbus dbi ingress ipv4 if smac=e4f8.9c6d.e494 show platform capture elam trigger slave eu10 rbus rbi pb2 show platform capture elam start Thanks, Hefin _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
