I came across with this link and it saying default sample rate 10000 https://www.plixer.com/blog/netflow/how-to-configure-netflow-on-the-cisco-asr/
This is my configuration, nothing fancy. flow record netflow-record match ipv4 destination address match ipv4 source address match transport destination-port match transport source-port match ipv4 protocol collect counter bytes collect counter packets collect timestamp sys-uptime first collect timestamp sys-uptime last ! flow exporter netflow-exporter destination x.x.x.x source TenGigabitEthernet0/0/0 transport udp 9995 ! flow monitor netflow-monitor exporter netflow-exporter cache timeout active 60 record netflow-record On Thu, Jan 5, 2017 at 9:57 PM, Roland Dobbins <[email protected]> wrote: > On 6 Jan 2017, at 6:48, Satish Patel wrote: > >> Any thought? > > On a smaller box like the 1K, it's likely to be 1:1, yes? > > Have you set the active timer to 60s, and the inactive timer to 5s? > > ----------------------------------- > Roland Dobbins <[email protected]> > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
