Hi Enno,
> On 26 Jan 2017, at 08:42, Enno Rey <[email protected]> wrote:
>
> from the top of my head "no ipv6 mld join-group" should achieve that (whereas
> "no ipv6 mld router" disables the querier side of things).
> have you tried that (the former)?
'no ipv6 mld join-group' requires a group address to be specified, I've tried
the ff02::1 group address (that the mld queries are sent to), and it neither
showed up in the configuration (presumably it only removes an 'ipv6 mld
join-group' config line), nor made any difference to the 4500E or the 6500
responding to the MLD queries.
Router(config-if)#no ipv6 mld join-group
% Incomplete command.
Router(config-if)#no ipv6 mld join-group ?
X:X:X:X::X IP group address
Router(config-if)#no ipv6 mld join-group ff02::1
Thanks
James
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
