the full command to summarize external LSA is summary-address, it wasn't very clear on my last email
On Thu, Feb 2, 2017 at 9:16 PM, Fabio Mendes <[email protected]> wrote: > If I understood correctly you are generating an IA LSA via the area range > command on the ABR and are also receiving a E1/2 LSA for a /24 that is part > of the IA range and want to mask it behind that same IA LSA. > > One simple way to do it is use the summary command under the ospf process, > announcing a 10.0.0.0/8 to the backbone area. > > Now the backbone has an IA for 10.0.0.0/8 and a E1/2 for the same prefix. > > In that case the IA will be preferred. > > Since the 10.100 subnet is behind the same ABR that's generating the > 10.0.0.0/8 IA into the backbone, you will not have any connectivity > problems by doing that. > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
