Thx for the hint, indeed "sh controllers gigabitEthernet 0/0" prints it.
No mention of MAC 0000.0000.0000 in the output, but packets with all-zero DMAC are apparently counted both under ffff.ffff.ffff hits as well as under Software filtered frames. In reality they pass through to L3 processing. 2017-05-08 11:35 GMT+02:00 Saku Ytti <[email protected]>: > On 8 May 2017 at 12:25, rako <[email protected]> wrote: > > The question is really why destination MAC 0000.0000.0000 passes behind > > PHY/mac_filter on this platform and whether such behavior should be > > generally considered wrong. > > You can view the contents of the MAC filter, I don't have any classic > IOS CPEs, so I can't tell you exact command, but it's under 'show > controller ...' somewhere. It's not going to be conclusive I'm afraid, > but might help. > > > -- > ++ytti > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
