Looks like it's a limit of 3.7, however Denali 16.3.1 notes appear to increase this to 16.
However of course, it appears 16.3 doesn't support my SIP10 cards, does anyone know if this is the case in 16.5 everest? --David __________________________________________________ David Deutsch Chief Technology Officer Televergence Solutions, Inc. (213) 943-2012 (Direct) [email protected] On Fri, Jun 9, 2017 at 8:44 AM, Chuck Church <[email protected]> wrote: > It's my understanding that this is the platform limit, and can't be > changed. > I don't recall the docs that verified it, but our Cisco SEs told us that. > > Chuck > > -----Original Message----- > From: cisco-nsp [mailto:[email protected]] On Behalf Of > David Deutsch > Sent: Friday, June 9, 2017 8:12 AM > To: [email protected] > Subject: [c-nsp] ASR1006 ESP20 SIP10 LAG/LaCP Limitations > > Hello all, > > I've got a new ASR1006(2xESP20, 2xSIP10) and am trying to establish a 8 > port > LaCP LAG back to my main switch stack. However getting the following error > when trying to add the 5th interface to the port group: > > Error: Cannot exceed 4 interfaces per channel > > I'm surprised that this model has such a small limit, can anyone point me > to > a model specific document that shows this as a hard limit? or should I look > for an IOS XE command to increase it. > > Any advice appreciated. > > --David > __________________________________________________ > > > David Deutsch > Chief Technology Officer > Televergence Solutions, Inc. > > (213) 943-2012 (Direct) > [email protected] > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
