On 21 Jun 2017 22:55, "Nick Cutting" <[email protected]> wrote:
Has anyone used this? I have used it on other IOS-XE routers 44xx/3xxx with no issues. My captures are empty on the ASR-920 Code running is: 03.18.01.SP.156-2.SP1-ext Any experiences greatly welcomed. Nick Hi Nick, What traffic are you trying to capture? I got this working as per these notes (I had done something similar on ASR1000s but it turns out the syntax is slightly different on the ASR920): https://null.53bits.co.uk/index.php?page=embedded-packet-capture-epc However that was a while ago, if I recall correctly I had was PPPoE traffic tagged in a specific VLAN that I wanted to inspect and this wasn't showing up in the traffic capture so I ended up having to SPAN the port on the neighbouring device. So I think it's not perfect and possibly not even sure its supported. I didn't bother with TAC as the SPAN worked fine and I haven't needed it since. Cheers, James. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
