On 21/Jul/17 15:20, Samir Abid Al-mahdi via cisco-nsp wrote:
> Dears Experts, > > We are an ISP that is leasing an international circuit of 2 10G to connect > to level3 at Sofia-connect. The lease circuit is planned on two different > physical routes to provide protection. Now we need to send a device over > there to provide the following functionality: > > 1. Load balance between the two different 10G lease circuit, perhaps OSPF > with the local router, or any other suggestion. > 2. Establish multi-BGP sessions with the ISP ( Full bgp routing table ) and > remote-peer sessions. > 3. Should be able to provide HQOS functionality. The aim is that in the > case of congestion, the routers will prioritize a set of IP address range > and guarantee a certain percentage of the traffic. > 4. To monitor the status of the lease circuit performance by O&M instances > or any other tools with the help of the local router so that we can tell > whether packet-loss/jetter is happening. > > Can you please suggest a router model, A Cisco vendor is preferred and what > are the features that will perform this link performance monitoring. A Cisco ASR1000 or ASR9001 should be small enough, and more than enough. Mark. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
