All,
I've been looking everywhere for a definitive doc on Ingress QOS
service-policy support. All the docs I've found on Cisco's site seem to
mentions IOS-XE 3, but seem to be ASR1K specific. Can't seem to find any
etherchannel docs for ISR4K specifically. Upon trying to apply an ingress
policy on a 4K port channel int (main int has IP address, no subints), the
error message "service-policy input COS-IN not supported on this target" is
displayed. It's a 4451-X running 3.13.3. Port channel config looks like
this:
interface Port-channel1 description HJ102530 Customer LAN ip address
10.x.y.2 255.255.255.252 no ip proxy-arp ip flow monitor netflow input ip
flow monitor netflow output ip tcp adjust-mss 1432 no negotiation auto
Now I did find in this doc:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/qos_mqc/configuration/xe-3s/qos-mqc-xe-3s-book/qos-eth-int.html#GUID-AD7EB461-CAD5-463F-9F0D-4486D327D049
reference to these commands: port-channel load-balancing vlan-manual
or load-balancing
vlan (on interface)
This router is ISP-owned so I'd like to find out the definitive answer
prior to having them try something. Anyone know the real deal with QOS and
4K?
Thanks,
Chuck
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
